Stainless steel seamless pipe installation has six major points of attention

In the process of installation, the stainless steel seamless pipe has a lot of attention, so as to ensure the subsequent safety of use. Let me talk about the installation of stainless steel seamless pipe with six major points of attention.

1. The T-type interface pipe shall be provided with a buttress in the vertical or horizontal direction. The size of the buttress should be determined according to factors such as pipe diameter, corner angle and working pressure.

2. The outer anti-corrosion coating of stainless steel should be selected according to the soil condition of the pipe, and the galvanized and epoxy asphalt coating or the higher required coating.

3, according to the groove soil quality, groundwater, slotted section, load conditions and other factors to design, the requirements are firm and reliable, to prevent landslides, support should not hinder the down tube and stabilize the tube.

4. As long as it is a stainless steel wire connected to the socket, it is necessary to calculate the pier.

5. After the pipeline is installed and tested, it is best to use low chloride ion water rinse and 0.03% potassium permanganate disinfection.

6. When transporting drinking water, the pipeline should not pass through the poisonous contaminated area. If it needs to pass through, it should take protective measures.

After reading the above content, I believe that everyone knows the six major points of attention in the installation of stainless steel seamless pipes.